To use a Cam Favorite, pich the cam that you want to try out, the choose “Load”. Then if you want you can edit the parameters on the “Motion” tab of the Cam dialog box.
cam05
- Mold Design Series
- Tolerance Stackup with GD&T Orientation Factored
- Cam Setup in SolidWorks Toolbox
- Cam Motion Tab in SolidWorks Toolbox
- Cam creation settings in SolidWorks Toolbox
- Cam generated with the "Arcs" option turned on
- Cam generated with the "Arcs" option turned off resulting in lines
- Cam with a spline fitted through lines or arcs generated by the Cam tool.
- The important part of the Camera Property Manager
- Example of one rule
Comments are closed, but trackbacks and pingbacks are open.