You will then be presented with a PropertyManager that shows a Sheet Metal radio button as the default choice. Then you can decide if you just want the geometry “Arrow A” or if you want to include the Bend Lines “Arrow B”
sheet metal 02
- Mold Design Series
- Tolerance Stackup with GD&T Orientation Factored
- Cam Setup in SolidWorks Toolbox
- Cam Motion Tab in SolidWorks Toolbox
- Cam creation settings in SolidWorks Toolbox
- Cam Favorites, a great place to start
- Cam generated with the "Arcs" option turned on
- Cam generated with the "Arcs" option turned off resulting in lines
- Cam with a spline fitted through lines or arcs generated by the Cam tool.
- The important part of the Camera Property Manager
- Example of one rule
- Part of SolidWorks Professional and Premium
- Tell the upgrade wizard which version of SolidWorks to convert to
Comments are closed, but trackbacks and pingbacks are open.