A part that is a good candidate for DXF output to laser or flamecut
01_flamecut
- Mold Design Series
- Tolerance Stackup with GD&T Orientation Factored
- Cam Setup in SolidWorks Toolbox
- Cam Motion Tab in SolidWorks Toolbox
- Cam creation settings in SolidWorks Toolbox
- Cam Favorites, a great place to start
- Cam generated with the "Arcs" option turned on
- Cam generated with the "Arcs" option turned off resulting in lines
- Cam with a spline fitted through lines or arcs generated by the Cam tool.
- The important part of the Camera Property Manager
- Example of one rule
- Part of SolidWorks Professional and Premium
- Tell the upgrade wizard which version of SolidWorks to convert to
Comments are closed, but trackbacks and pingbacks are open.